Shop All Products

Pump Supports

Pump Supports

Front support bearings from our OMT range are coupled directly to the gear pump, the support protects both the shaft of pump and the motor from high radial loads and can also be used as support for chin belts.

Running at 1500 rev/min the support life is approximately 3500 hours.

The housings of the supports are made of cast aluminium alloy with the shafts machined from special steel and are available for group 1, 2 & 3 hydraulic gear pumps and are to be used in conjunction with the splined coupling.

If you need any technical information such as dimensions then please view the PDF datasheet at the bottom of this page, alternatively you can telephone our sales office on 01706 378625 or contact us online should you need any further help choosing the correct parts for your application or if you have any special requirements. Please note our Minimum Order Value is £25

Pages: 1 
Showing 1-9 of 9  per page
SP-U1P
OMT  SP-U1P

Group 1 Front Support Bearing with 18mm Parallel Shaft

For use with Standard 4 Bolt European Flange 1:8 Taper Group 1 Gear Pumps

Product code:  4005
From £68.70  (ex VAT)
SP-U1P-C
OMT  SP-U1P-C

Group 1 Front Support Bearing with Taper Shaft

For use with Standard 4 Bolt European Flange 1:8 Taper Group 1 Gear Pumps

Product code:  4001
From £44.54  (ex VAT)
B-U1P
OMT  B-U1P

Splined Coupling for Group 1 Gear Pump

For use with 1:8 Taper Shaft, 2.4mm Keyway

Product code:  4006
From £6.76  (ex VAT)
SP-R2
OMT  SP-R2

Group 2 Front Support Bearing with 22mm Parallel Shaft

For use with Standard 4 Bolt European Flange 1:8 Taper Group 2 Gear Pumps

Product code:  4009
From £101.37  (ex VAT)
SP-2-C
OMT  SP-2-C

Group 2 Front Support Bearing with Taper Shaft

For use with Standard 4 Bolt European Flange 1:8 Taper Group 2 Gear Pumps

Product code:  4002
From £55.00  (ex VAT)
B-R2U
OMT  B-R2U

Splined Coupling for Group 2 Gear Pumps

For use with 1/8" Taper Shaft, 4mm Keyway

Product code:  4010
From £9.80  (ex VAT)
B-R2CA
OMT  B-R2CA

Splined Coupling for Group 2 Gear Pumps

For use with 1/8" Taper Shaft, 3.2mm Keyway

Product code:  4010A
From £9.80  (ex VAT)
SP-3U
OMT  SP-3U

Group 3 Front Support Bearing with 24mm Parallel Shaft

For use with Standard 4 Bolt European Flange 1:8 Taper Group 3 Gear Pumps

Product code:  4011
From £72.85  (ex VAT)
B-3
OMT  B-3

Splined Coupling for Group 3 Gear Pumps

For use with 1/8" Taper Shaft, 4mm Keyway

Product code:  4012
From £9.06  (ex VAT)

Get our latest news and offers straight to your inbox

No thanks

No charge. Cancel anytime. We value your privacy and will not share your details.

Bosch Rexroth logo Galtech logo Sofima Filters logo UFI Filters logo OMT logo OMFB logo
Mikrospin is a limited company registered in England and Wales. Registered office: Mikrospin Limited, Mikrospin House, William Street, Littleborough, Lancashire OL15 8JP. Registered number: 1980816
Copyright © Mikrospin 2012 - 2025. All rights reserved.
Website design, website development and software development by The Creative Branch
Carbon Smart Certified