Information
Group 3 Front Support Bearing with 24mm Parallel Shaft
- Suitable for use with standard European 4 Bolt Flange, 1:8 Taper Shaft Group 1 Gear Pumps & Motors
- Protects the Shaft of Pumps & Motors from high radial loads
- Can also be used as support for chin belts
- Cast Aluminium Alloy
- Special Steel Shaft
- For use with DIN 5482 Splined Coupling
- Lifetime 3,500 hours at 1,500/min
- 24mm Parallel Shaft
- 50.8mm Spigot
- 4 x 11mm Mounting Holes
- A40x8x7 Shaft Key
- Dimensions: 128mm Height x 98.5mm Width x 52mm Depth (Excluding Shaft)
If you require the Splined Coupling then add the suggested product located at the bottom of this page.
For further technical information and product dimensions please download the datasheet located at the bottom of this page.
Alternatively if you need further help choosing the correct front support bearing for your application then please contact us on 01706 378625 or complete our online enquiry form.